Gallery — Immortal Guitars-Shop-Gallery-About-Contact

Skip to Content

Singer Automatic Sea Foam Green

Close-up of a steampunk-style guitar made by Immortal Guitars, with a copper-colored metal body, mechanical parts, gears, wires, and a textured finish, set against a backdrop of green palm leaves and a clear blue sky.

Close-up of a steampunk electric guitar made by Immortal Guitars resting on white fur with lenses, guages, copper plating, knobs and recycled parts from vintage projectors, cameras, various control knobs, and a whammy bar.

Acustom-built steampunk style electric guitar made by Immortal Guitars, with trumpet parts, metallic and brass components, lenses, guages, and knobs against a backdrop of green palm leaves and a blue sky.

Close-up of parts of an Immortal Guitars steampunk guitar with attached lyre, electronic parts, projector parts, red accents.

Close-up detail of an Immortal Guitars steampunk guitar with mechanical gears and components on a circuit board, labels, knobs, along with various screws, metal parts, and a flexible metal conduit and knobs

The LaBelle 55, named for vintage parts from 1955 LaBelle slide projector Made by Mike Moulton, luthier atImmortal Guitars.Sounds and plays great. Also used clarinet parts. Flat black with burnished copper, aluminum, Steampunk Guitar. Attached lyre.

Acoustic hand carved archtop with fixed bridge. AAAA maple back & sides, maple fingerboard, custom made, one of a kind. Inlay of ebony, mother of pear, & herringbone. Made by Elaine Moulton, luthier. Immortal Guitars.

An acoustic carved archtop mandocello guitar made by Immortal Guitars standing upright outdoors among green bushes and grass in sunlight.

Two stringed carved archtop acoustic musical instruments made by Immortal Guitars, a mandola and a mandolin, lying on green grass. The mandola is on the left, and the mandolin is on the right.

Close-up of a custom made acoustic archtop guitar headstock with decorative inlays of a hummingbird, leaves, and a rope pattern, set against green foliage background made by Immortal Guitars.

A carved archtop mandola with a reddish-brown finish, gold hardware, and a black pickguard, standing upright against a wall made by Immortal Guitars.

Close-up detail of the upper horn of an Immortal Guitars steampunk guitar with a kalimba, copper plate with a label that reads '8 MM SUPER 8' and a toggle switch, set on a red and black patterned guitar body with a textured gray fur background.

Multiple kalimbas from various exotic wood made by Immortal Guitars arranged on the ground among yellow flower petals in a natural outdoor setting.

An Immortal Guitars wooden kalimba made from exotic wood placed on a stone surface.

Close-up detail of a steampunk guitar made by Immortal Guitars with mechanical gears, metal components, and a label with partially visible text, part of a larger machine or device.

Close-up of an acoustic parlor guitar made by Immortal Guitars with a sunburst finish, tortoise shell pickguard, and shiny metallic tuning pegs, placed outdoors on a black stand against a background of red rocks and paving stones.

Close-up of an Immortal Guitars steampunk guitar headstock showing tuning pegs, strings, and electronic components, including a speaker grille and wiring.

An electric guitar with its body and components made by Immortal Guitars with various electronic and mechanical parts, showcasing a steampunk-inspired design.

Close-up detail of the lower bout of an Immortal Guitars steampunk guitar with lens from projector, a metallic and wooden mechanical device with screws, vents, and a glass cover revealing inner components.

Steampunk Guitar using parts from a Dukane projector. inset propellers, wiring, electric. Made by Mike Moulton at Immortal Guitars.

Close-up of headstock made by Immortal Guitars in the steampunk style with various labels, several metallic parts, screws, and wires, lying on a textured dark surface.

Close-up detail of an Immortal Guitars steampunk guitar with metallic and copper components, trumpet parts, gears, wires, labels, and brass parts connected by springs and screws.

Close-up of an Immortal Guitars steampunk guitar with metal, wood, and brass components, featuring gauges, wires, lenses, projector parts, and piping.

A carved archtop acoustic guitar made by Elaine Moulton at Immortal Guitars with a dark finish is placed among green plants and tulips in a garden. There are white-barked trees and shrubs in the background.

A carved acoustic archtop made by Immortal Guitars with custom top plate, AAAA maple with tailbpiece, unique carved soundholes lying on a gray carpeted floor.

A hand carved acoustic mahogany guitar made by Elaine Moulton at Immortal Guitars with cherry finish, gold floral inlay design on its body, leaning against a large agave plant outdoors.

Close up detail of a custom steampunk guitar headstock made by Mike Moulton at Immortal Guitars, with tuning pets, metal, lenses, labels copper binding and part of the neck lying on a animal print blanket

Close-up detail of the upper horn of a steampunk guitar made by Mike Moulton at Immortal Guitar with a kalimba, copper plate with a label that reads '8 MM SUPER 8' and a toggle switch, set on a red and black patterned guitar body with a textured gray

Close-up of a custom-built electric steampunk bass guitar made by Immortal Guitars with metallic and gold accents, multiple knobs, lenses, projector parts, camera parts, pulleys, and a unique body design, lying on a light-colored fabric surface.

Close-up detail of a custom steampunk guitar headstock made by Immortal Guitars with metal plating, lenses, screws, mechanical parts with visible gears, screws, and metal components on a fuzzy white surface.

A custom steampunk guitar made by Immortal Guitars and hanging from mirrored display with steampunk detail photos hanging by the side.

Back of the custom made Immorgal Guitars Trumpet Steampunk Guitar

Three vintage steampunk speaker cabinets made by Immortal Guitars stacked vertically, made from vintage projector boxes with speakers covered by metal grilles, next to a decorative black and gold lamp and a leafy plant.

A custom hand carved archtop acoustic made by Immortal Guitars using AAAA maple wood with an inlay of a tiger with a rose in a sunburst finish resting on a furry, animal print blanket.

Back and sides with tailblock and neckblock of a custom guitar made by Immortal Guitars showing interior bracing made from AAAA grade maple, and sapele exotic woods with Immortal Guitar label on the inside sitting outdoors on a wooden surface.

Steampunk Guitar made by Mike Moulton, Immortal Guitars, parts from vintage projectors, lenses, french horn keys, copper wiring

An exotic wood music stand made by Immortal Guitars with gold inlay of a hummingbird and leaves made by Immortal Guitars, set in a garden with purple irises and green plants.

A custom travel bass made by Immortal Guitars with 34"scale, humbucker pickups, made with maple and an ebony fretboard by Immortal Guitars standing in front of a greenroom

Steampunk Guitar by Mike Moulton at Immortal Guitars, vintage parts from LaBelle 55 projector, labels, lenses, custom made, one of a kind, kalimba, clarinet, lyre

Headstock being custom made by Immortal Guitars using ebony, mother of pearl, gold wire, brass circles, and

carved archtop, made from exotic wood, custom made by Elaine Moulton at Immortal Guitars, mahogany, top, sides, neck, one of a kind

6 string bass, custom made by Mike Moulton at Immortal Guitars, copper pickguard, inlay party theme of mother of pearl and abolone, lightweight, rosewood fretboard.

6 string bass, sitting on vintage upright grand piano, custom one of a kind by Immortal Guitars.

headstock of 6 string bass guitar, custom made, party theme, inlay mother of pearl and abalone. Immortal Guitars, luthier Mike Moulton.

Burl from spruce tree, hollowed out to create custom one of a kind tenor guitar. Immortal Guitars, lutier, Elaine Moulton

tenor guitar made from spruce burl, hand carved, fixed bridge, custom made by Elaine Moulton, luthier, Immortal Guitars, maple fretboard with custom inlay of animal prints. Headstock with ski tracks.

custom made tenor guitar from spruce burl, animal prints of ebony on maple fretboard. Hand carved by Elaine Moulton, luthier at Immortal Guitars.

Back side of custom made tenor guitar, made from spruce burl, hand carved by Elaine Moulton, luthier, Immortal Guitars.

Steampunk Guitar, custom made by Mike Moulton, luthier at Immortal Guitars, using parts from vintage Dukane projector, camera and projector lenses, vintage parts.

2 acoustic hand carved archtop guitars. Made by Elaine Moulton, luthier at Immortal Guitars. Left one with inlay of desert landscape on tailpiece and headstock, mahogany top, sides, and back. Rosewood fretboard with inlay. Right guitar,AAAA maple, sa

Custom hand carved archtop, maple and sapele, wood, unique inlay, made by Elaine Moulton, luthier, Immortal Guitars

hand carved archtop by Elaine Moulton, Immortal Guitars. Mahogany top, back, sides. Tailpiece with inlay of moon, stars, mountains. Brass stars inlay on front of guitar.

Hand carved mahogany acoustic bass guitar, with rose inlay on body & headstock, tailpiece of ebony. Made by Elaine Moulton, Immortal Guitars. one of a kind

Hand carved acoustic archtop back view. AAAAmaple and sapele wood. Made by Elaine Moulton, luthier at Immortal Guitars

Steampunk Guitar headstock made by Mike Moulton, luthier at Immortal Guitars, featuring various parts from vintage projectors, cameras, lenses, copper tubing, propeller, one of a kind, custom made

close up detail of Steampunk Guitar, made by Mike Moulton, luthier at Immortal Guitars. using clarinet parts, copper tubing, guages, labels, one of a kind

Custom hand carved archtop guitar, with inlay of mother of pearl, abolone, exotic wood. Maple back, neck, sides. One of a kind made by Elaine Moulton, luthier at Immortal Guitars.

Blue DuJur Steampunk Guitar, Mike Moulton, luthier, Immortal Guitars, made from vintage 8mm projector parts, lenses, labels, trumpet parts, lyre

Beginning of inlay of Tiger Head for headstock of archtop Guitar, made by Elaine Moulton, Immortal Guitars.

Maple headstock with Tiger Inlay for carved archtop guitar, using mother of pearl, ebony. By Elaine Moulton, luthier, Immortal Guitars.

Custom electric bass guitar back with morning glory flowers, night sky, with moon and stars by Immortal Guitars.

Hand carved acoustic bass, one of a kind, top plate spruce, back and sides from cocobolo, abalone inlay around soundhole, custom inlay on tailpiece and headstock, modern design inlay. Made by Elaine Moulton, luthier at Immortal Guitars. Bass travel

unfinished mandolin, spruce top, hand carved archtop by Mike Moulton, luthier at Immortal Guitars

AAAA grade maple back on custom carved archtop guitar by Elaine Moulton, luthier at Immortal Guitars

closeup detail of the Blue DuJur steampunk guitar, Immortal Guitars, Mike Moulton, luthier, made from vintage 8mm projector, labels, lenses, misc. parts from projector, trumpet pieces, lyre.

Headstock from Steampunk Guitar, Blue DuJur, Mike Moulton, luthier, Immortal Guitars, using parts from 8mm projector

Shop‍‍ Gallery ‍About ‍Contact